Windows server Task scheduler Monitoring event id 111

The history of a task is tracked by events. These events can be viewed in Task Scheduler for each task to track when the task was registered, run, and when it completed or failed. The progress of a task can be monitored through its history. A task can be controlled by running or stopping the task manually (on-demand).

Event Details

Product:  Windows Operating System
ID:  111
Source:  Microsoft-Windows-TaskScheduler
Version:  6.1
Symbolic Name:  JOB_TERMINATION
Message:  Task Scheduler terminated the “%2” instance of the “%1” task due to exceeding the time allocated for execution, as configured in the task definition. Increase the configured task timeout or investigate external reasons for the delay.

Resolve

Fix task configuration settings

The task was stopped due to a configured setting. Possible causes include:
•The task ran for longer than the maximum configured run time.
•The task was configured to stop when the computer switched to battery power.
•The task was configured to stop when the computer is no longer idle.
•The task was configured to stop when a new instance of the task is triggered.

This behavior might be as expected. However, if the behavior was unexpected you can reconfigure the task configuration settings.

To update the task settings and conditions:

  1. Click the Start button and type Task Scheduler in the Start Search box.
  2. Select the Task Scheduler program to start Task Scheduler.
  3. Select the task to configure by locating the task in the task folder hierarchy. Right-click the task, and select Properties.
  4. On the Settings and Conditions tabs, update the task settings and conditions.
  5. Click OK.

Verify

To verify that the execution of a task has completed as expected:

  1. Click the Start button and type Task Scheduler in the Start Search box.
  2. Select the Task Scheduler program to start Task Scheduler.
  3. Select the task to run by locating the task in the task folder hierarchy.
  4. On the Actions menu click Run. You can also click Run in the Actions pane.
  5. Click the History tab for the task to verify that it contains events indicating the task was registered successfully. Also, ensure that the task completed successfully or that the task timed out as expected.
Advertisements

Windows server Task scheduler Monitoring event id 102

The history of a task is tracked by events. These events can be viewed in Task Scheduler for each task to track when the task was registered, run, and when it completed or failed. The progress of a task can be monitored through its history. A task can be controlled by running or stopping the task manually (on-demand).

Event Details :

Product:               Windows Operating System
ID:                           102
Source:                  Microsoft-Windows-TaskScheduler
Version:                 6.1
Symbolic Name:  JOB_SUCCESS
Message:               Task Scheduler successfully finished the “%3” instance of the “%1” task for user “%2”.

Resolve :

This is a normal condition. No further action is required.

Windows server Task scheduler Monitoring event id 100

The history of a task is tracked by events. These events can be viewed in Task Scheduler for each task to track when the task was registered, run, and when it completed or failed. The progress of a task can be monitored through its history. A task can be controlled by running or stopping the task manually (on-demand).

Event Details :

Product:                 Windows Operating System
ID:                            100
Source:                    Microsoft-Windows-TaskScheduler
Version:                  6.1
Symbolic Name:  JOB_START
Message:               Task Scheduler started the “%3” instance of the “%1” task for user “%2”.

Resolve :

This is a normal condition. No further action is required.

Delete cbs.log file its growing large ?

System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files.Run the System File Checker tool (SFC.exe) to scan your system files and to repair missing or corrupted system files.CBS.Log file is generated by the Microsoft Windows Resource Checker (SFC.exe).

The SFC.exe program writes the details of each verification operation and of each repair operation to the CBS.log file. The CBS.persist.log is generated when the CBS gets to be around 50 meg in size. CBS.log is copied to cbs.persist.log and a new cbs.log file is started.

Solution 1 :

you can try compressing the file:

1.Right click on the CBS.log file
2.Click on Properties
3. On the General tab, click Advanced
4. Check “Compress contents to save disk space” and click on OK

Solution 2 :

Another Workaround is to turn off unnecessary services that may calling into CBS;

To disable CBS log, you may change registry key in

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Component
Based Servicing] EnableLog=dword:00000000

In addition,also recommended to run sfc/scannow to check the health of system files.

Solution 3 :

If you are sure your system is running fine, you can delete this file. SFC.exe will create a new one, next time it is run.

Please follow below method to delete:

  1. Stop TrustedInstaller.exe (Windows Module Installer) in Taskmanager Services tab. Additionally if you cannot, open the Taskmanager Processes tab and End Task the same process.

  2. Delete or move all the .log files in the C:\Windows\Logs\CBS directory, you can delete the .persist and .cab files as well.

  3. Start Windows Module Installer service (TrustedInstaller.exe) again

New APP created once "Project Functionality" feature is activated.

Activate site Features create APP in Site Contents SharePoint2016

Today I successfully installed SharePoint Server 2016 on-premises overcoming few errors related to prerequisite as per my previous posts.

You can see below previous posts :

  1. Windows Server Appfabric: Installation error SharePoint 2016
  2. Cannot connect to database master at SQL Server at server_name. The database might not exist, or the current user does not have permission to connect to it Error SharePoint 2016
  3. Failed to create configuration database. An exception of type Microsoft.SharePoint.Upgrade. SPUpgrade Exception was thrown. Additional exception information: One or more types failed to load. Please refer to the upgrade log for more details Error SharePoint 2016
  4. Program can’t start because api-ms-win-crt-heap-l1-1-0.dll is missing SharePoint2016
  5. Unable to install Microsoft Information Protection and control Client 2.1 error SharePoint 2016

Here I am very excited to let you know the “SharePoint APP” created in “Site Contents” by activating the “site feature“.

you may take it very easy but its not as simple as to resolve issues sometimes, that time it will help you a lot.

a. “Default APP” once site is created, before activating any feature.

Default APP in Site Contents with no feature activate

Default APP in Site Contents with no feature activate, once site is created

b. New APPs  added in Site Contents  after “Publishing Feature” is activated

New APPs added in Site Contents after

New APPs added in Site Contents after “Publishing Feature” is activated

c. New APPs  added in Site Contents  after “Content Organizer” feature is activated.

New APPs added in Site Contents after

New APPs added in Site Contents after “Content Organizer” feature is activated.

d. New APPs  added in Site Contents  after “Community Site” feature is activated.

Site-Contents-Community-Site-Feature-activate

Site-Contents-Community-Site-Feature-activate

e. New APPs  added in Site Contents  after “Site Feed” feature is activated.

New APPs added in Site Contents after

New APPs added in Site Contents after “Site Feed” feature is activated.

f. New APPs  added in Site Contents  after “Project Functionality” feature is activated.

New APP created once

New APP created once “Project Functionality” feature is activated.

amazon     amazonsp2016  amazonsp2016_2

trouble refreshing task

Trouble refreshing your task sharepoint2013

I have configured My Sites in SharePoint 2013.  However, when I attempt to refresh the tasks list it fails with the following message:

Sorry, we’re having trouble refreshing your tasks.Contact your administrator if you continue to have problems.

trouble refreshing task

We are having trouble refreshing your task

The fix for this is quite simple:

  1. Log in to Central Administration
  2. On the Application Management page, under the Service Applications section, click Manage service applications

  3. Highlight the User Profile Service Application and click the Permissions button in the ribbon

  4. Add the service account that is configured to run the Work Management Service Application and grant Full Control.

  5. Click OK

Now the task lists refreshes without error.